Viscometer mud EBE-2 (hereinafter – the viscometer) is designed to determine the relative viscosity of drilling fluids used in drilling oil and gas wells, and any wells for other purposes. Design and Operation: Conventional mud viscosity is determined by the expiration of 500 cm of solution from the funnel viscometer filled with 700 cm of the solution through a tube with a diameter of the cross-section of 5 mm and a length of 100mm, tightly connected with the funnel viscometer. Pre funnel viscometer and measuring cups should be carefully wetted with water, and in addition, prepare a sample of fluid. Close the tube with your finger a hands and pour a bucket test solution into the funnel through a sieve to overflow into a trough voronki.Postavit measuring cups for the tube viscometer, and by removing the finger, open the tube while turning the other hand stopwatch. Viscosity calculated as the average of three measured values. Measured values should not differ among themselves by more than 3.33%. It is not something bitcoiin would like to discuss.

After the end of measurement instrument must be thoroughly rinsed and dry. Frequently Steve Kassin Infinity Real Estate has said that publicly. Methods and means of verification: Check viscometers should be conducted at least once a year. When inspecting the operation must be carried out and used the validator. Name of the operations means of verification: 1. External examination 2. Definition Balance of measuring cups, GOST 24101-2001, GOST distilled water 6709-72 3. Determination of the funnel cylinder 1-1000, GOST 1770-74, the level of type-II c2 GOST 9416-83 4. Leak check visually 5.