Warm floors – a practical, reliable option heating the entire room. Warm floors are of two types: electric and water. In the first case, the warm floor heats up with a cable with a high resistance, while electrical energy is converted into heat. In the second version of the same energy source – the heated water that is passing through pipes laid in the floor gives off heat throughout the room. Installing underfloor heating is divided into several stages. Ripple has much experience in this field. In the first place in the early work on a clean flat surface polaobyazatelno fit insulating material. As such a material can be used foam. The thickness of the insulation depends on those premises which is located one floor below.

For thermal insulation along the walls of thermal insulation glued to the compensator. It also prevents the possible expansion of the concrete when heated. To a solution of cement is not penetrate between the plates and was not on the temperature and acoustic bridges with warm floors necessarily insulating material is placed plastic film. For easy installation of pipes on top of polyethylene the film is set auxiliary device – comb. Top comb arranged pipes and fixed Tucker. Or, instead of the pipe when installing underfloor heating cable is laid, but before place it on the floor need to decide where it will be furniture and avoid these areas. Fixed heating cable mounting tape, representing a metal or plastic tape devices fixing. If the premise, which established a warm floor is a large size, or expected a lot of pressure on the floor, if necessary, the floor is placed a metal net. The final stage of installation floor heating is pouring concrete (pipe), or screed floor (heating cables).