Western companies as gaskets using a variety of plastics, the Russian campaign is most often used paronity that are effective heat insulator. Each approach has its advantages and disadvantages. At point mount, by virtue of a constructive solution, the thermal conductivity is lower, but at the same time is reduced and load-carrying capacity attaching the brackets to the wall with increasing the contact area the situation is inverse. 2. Bearing construction bearing structure consists of corrosion profiles (aluminum, stainless or galvanized steel, alloy rims) or antiseptirovannogo tree.
Developed a wide variety of profiles for different facades (T -, T – shaped, U – shaped, etc.). Carrier profile design is used in three types: 1. Horizontal. Is the worst in terms of spatial structure, so as a profile in this system operates in bending and torsion. 2. Vertical.
The design of the vertical guide profiles the load and compressive strength (more favorable mode of operation), in addition, such construction does not impede the vertical (the main air flow). 3. Combined (combined). Is the best design. There are two types of sub-combination: 1 type – in this system to the body wall fastened horizontal rails and vertical rails to them, which go to load from tiles. In this design there is a redistribution load and does not create obstacles to the vertical air flow, but at the same time, the combined design of this type are quite metal and on the Russian market, while only foreign producers. Type 2 – in this system to the bearing wall mounted vertical direction, and are making – the horizontal.